Best Electric Chainsaw by Bar Length and Weight

The best electric chainsaw for woodworkers is the SEESII 12-Inch Electric Chainsaw Cordless, because a 12-inch bar at 9.92 lb sits in the gap between mini pruning saws and full 16-inch felling tools. If your stock runs thicker than a 4x4, the EGO POWER+ Chain Saw and its 16-inch bar is the better buy. Price tiers split this field cleanly: entry gets you a 6 or 8-inch bar and a plastic body, the middle buys a bar swap kit and a bundled battery, and the top of the range buys real bar length.

Best electric chainsaw for woodworkers at a glance

How the picks map to four kinds of buyer

Seven saws, four buyers. That's the honest shape of this field, and it explains why the ranking below is not a straight power ladder.

The buyer with no batteries yet. You want a saw that arrives ready to run. Three picks include cells: SEESII ships two 4.0Ah packs by its own listing, Supstable bundles 2x2000mAh, and EGO includes a 56V 2.5Ah battery and charger. Oregon needs no battery at all, since it's corded.

The buyer already on a platform. Two picks are bare tools built for someone else's battery. RYNOXUS takes Milwaukee M18. DEJUNPIOOL takes DEWALT 20V MAX and names the compatible packs down to DCB200 and DCB205. Neither is a saw you buy blind.

The buyer cutting small stock repeatedly. Trimming, notching, cutting stock down to rough length. Four of the seven picks top out at an 8-inch bar, and the lightest is 2.7 lb.

The buyer cutting real timber. Two saws here go past 12 inches: EGO at 16 inches, Oregon at 18 inches. Those are the only two that will cross a log in a single pass.

Read your own case off that list before you read the picks. The best electric chainsaw for woodworkers changes depending on which of the four you are, and three of these saws are wrong for most people.

Why bar length decides more than wattage

Every listing here leads with a wattage figure. It's the wrong number to compare.

Look at what happens when you line the claims up. DEJUNPIOOL claims 1200W behind a 6 or 8-inch bar and weighs 2.7 lb. SEESII claims the same 1200W behind a 12-inch bar and weighs 9.92 lb. Same headline number, two completely different tools. Wattage figures on mini saws are not measured to a shared standard, and a big number on a short bar mostly buys chain speed, not cutting reach.

Bar length is the real gate. It's published, it's standardised, and it sets a hard ceiling on the diameter you can cut in one pass. A 6-inch bar cannot reach through a 6-inch log, because you lose length to the drive housing.

Here's the practical ladder:

1. 6-inch bar — branches, small limbs, cutting sticks to length. VOTLEMI only.
2. 8-inch bar — small logs and 4x4 stock. DEJUNPIOOL, Supstable, RYNOXUS in their long configuration.
3. 12-inch bar — dimensional lumber, fence posts, larger limbs. SEESII.
4. 16 to 18-inch bar — bucking and felling. EGO and Oregon.

The second thing to check is weight, because it decides how long you can hold the saw at arm's length. There's a 9.9 lb spread across this set, from 2.7 lb to 12.6 lb. That's not a detail. It's the difference between a one-handed tool and a two-handed one.

1. SEESII 12-Inch Electric Chainsaw Cordless — Best overall

The 12-inch bar and 9.92 lb body put this saw exactly where most shop and yard work actually happens, between the pruning minis and the felling saws.

Best for: someone cutting lumber and limbs with one saw Skip it if: you already own an M18 or 20V MAX battery

Nothing else here occupies this middle rung. Four picks stop at 8 inches, two jump to 16 or 18, and the SEESII sits alone at 12 inches. That matters when your cutting list mixes 4x4 posts, storm limbs and rough stock, because a 12-inch bar handles all three without becoming a two-hand-only tool.

It's a cordless saw sold with its own power. SEESII's listing describes two 4.0Ah lithium packs in the box, which makes it one of only three picks here you can use straight out of the carton. The brand also claims a 1200W brushless motor and an oiling system that varies flow with chain speed. Treat both as the manufacturer's description rather than a measured figure.

The published weight is 9.92 lb and the body measures 16.54 x 14.96 x 10.24 in. That's heavier than every mini saw here by at least 5 lb. Note that one of SEESII's own bullets calls the saw "just 12 lbs" while the specification reads 9.92 lb, which is exactly the kind of internal mismatch worth spotting before you buy.

It also sells faster than every other pick in this set. Against the others, the trade-off is money and heft: it sits near the top of the range, and there's no published warranty, which the Oregon and Supstable listings both carry.

Pros:

• Only 12-inch bar in this set
• Two 4.0Ah packs described in the listing
• Sells faster than any other pick here
• Auto-oiling that adjusts with chain speed, per SEESII
• Published body dimensions for storage planning

Cons:

• No warranty stated on the listing
• Listing weight claim of 12 lbs contradicts the 9.92 lb specification
• Second-most expensive pick here
• Only one seller lists it

2. EGO POWER+ Chain Saw — Best premium

A 16-inch bar at a published 9 lb is the best power-to-weight ratio in this group, and the only cordless pick that reaches past 12 inches.

Best for: felling and bucking bigger stock outdoors Skip it if: your cuts are all under 8 inches thick

The number that makes this saw interesting is 9 lb. That's lighter than the SEESII with 4 more inches of bar, and 3.6 lb lighter than the corded Oregon with 2 inches less. Among long-bar saws, weight is what you fight for, and EGO wins it on paper.

EGO's listing states a 16-inch bar and chain, a 20m/s chain speed, a 56V 2.5Ah ARC Lithium battery and charger in the box, and up to 130 cuts on a 4x4 from that pack. It also calls the saw a 40cc gas equivalent. That last one is a marketing comparison, not a measurement, so weigh it as such. Tool-free chain tensioning is listed too, which four of the seven picks here share.

The 130-cut figure is the most useful claim on the listing because it's specific enough to plan around. If you're breaking down a stack of 4x4s, that gives you a rough sense of when to swap packs.

This is the most expensive pick in the set, and it's a 56V platform, meaning the battery doesn't cross over to any other tool you're likely to own. There's no published warranty on the listing either. Against the SEESII, you're paying more for bar length you may not need indoors.

Pros:

• 16-inch bar at only 9 lb published weight
• Battery and charger included
• 20m/s chain speed stated by EGO
• Up to 130 cuts on a 4x4 per the listing
• Tool-free chain tensioning

Cons:

• Most expensive pick in this set
• No warranty listed
• 56V battery won't share with common 18V or 20V tools
• Long bar is overkill for stock under 8 inches

3. Oregon CS1500 Self-Sharpening Electric Chain Saw — Best warranty

The longest bar here at 18 inches, a 2-year warranty, and no battery to charge or replace, in exchange for staying tethered to an outlet.

Best for: shop work near an outlet, with no battery to manage Skip it if: you need to walk more than a cord length from power

This is the only corded saw in the set, and the only pick with a warranty stated as a plain 2 year figure alongside a full model number, CS1500. It's also the longest at 18 inches and the heaviest at 12.6 lb, with a shipping envelope of 10.5 x 18 x 37.5 in.

Oregon's headline feature is the PowerSharp system, which the listing says sharpens the chain in 3 to 5 seconds using a built-in mechanism. For anyone cutting dirty reclaimed timber, where grit dulls a chain fast, that's the most genuinely differentiated feature on any listing here. Oregon also states a 15A motor, tool-free tensioning, automatic bar and chain oiling, pre-assembled delivery, and UL certification. It's the only pick in this set that mentions a safety certification at all.

Corded has a real upside in a shop: constant power, no runtime ceiling, nothing to recharge before a session. Two sellers list it, the only pick besides VOTLEMI with more than one.

The costs are obvious. It's the priciest of the seven, the heaviest by 2.68 lb, and the cord means an extension reel and a tripping hazard around a bench. Against the EGO, you give up all mobility to gain 2 inches of bar and a stated warranty.

Pros:

• Longest bar in the set at 18 inches
• 2 year warranty stated
• Built-in sharpening in 3 to 5 seconds per Oregon
• No battery to buy, charge or replace
• UL certified, per the listing

Cons:

• Heaviest pick at 12.6 lb
• Corded, so range is limited to your extension lead
• Most expensive of the seven
• Bulky 37.5 in length to store

4. DEJUNPIOOL Cordless Mini Chainsaw Compatible with Dewalt — Best upgrade

At 2.7 lb with four chains and two bar lengths in the box, this is the most complete mini saw here for anyone already running DEWALT 20V MAX packs.

Best for: DEWALT 20V MAX owners who want a second small saw Skip it if: you run a different battery platform

2.7 lb is the lightest published weight in this group. Combined with a 5.9 x 17.5 x 2.95 in body, this is a saw you hold one-handed above your head without your shoulder filing a complaint.

The reason it ranks above the other minis is what the listing says comes with it: two 6-inch chains and two 8-inch chains, four in total. Every other mini here gives you the bars but not the spare chains, and chains are the consumable that stops your work when it dulls. DEJUNPIOOL also names its compatible DEWALT packs explicitly, listing DCB200, DCB201, DCB203, DCB204, DCB205 and DCB206, which removes the compatibility guessing that plagues bare-tool listings. A 1200W brushless motor, automatic lubrication and tool-free tensioning are all claimed too.

It's the third-cheapest here, and it sits in the entry tier despite carrying more accessories than the mid-tier Supstable.

The catch is the platform lock. No DEWALT batteries, no saw, and the listing is explicit that no battery or charger is included. There's no published warranty either. Against the SEESII, an 8-inch maximum bar caps what you can cut in a pass.

Pros:

• Lightest published weight in the set at 2.7 lb
• Four chains included, two per bar length
• Compatible DEWALT pack numbers named in the listing
• Tool-free installation and tensioning
• Third-cheapest pick here

Cons:

• No battery or charger in the box
• Useless unless you own DEWALT 20V MAX packs
• 8-inch bar limits cutting diameter
• No warranty stated

5. Supstable Mini Chainsaw Cordless — Best minimal setup

Two batteries, two guide bars, gloves and goggles in one box, plus a 2-year warranty, which makes it the easiest pick to buy with nothing else.

Best for: a first saw bought with nothing else Skip it if: you want a bar longer than 8 inches

If you own no batteries and no safety gear, this is the shortest path to cutting wood. Supstable's listing describes two 2000mAh packs, 6-inch and 8-inch interchangeable bars, and a kit that includes gloves and protective goggles alongside a safety lock, debris baffle and auxiliary handle. It's one of only two picks here with a warranty stated, at 2 Year Manufacturer Warranty.

The published weight is 3.3 lb, with a body of 3.94 x 17.3 x 13.4 in. Supstable claims a 1000W brushless motor and up to 60 minutes of continuous runtime from the pair of batteries. Two packs matters more than the runtime figure does, because it means you cut while the other charges.

It's the second-fastest seller in this set, behind only the SEESII, and it sits roughly mid-range on price.

Two things to weigh. Its own bullet says 3.2 lbs while the specification says 3.3 lb, a small mismatch but worth noting. More significant, it's listed under chainsaw accessories rather than chainsaws, which is a category placement quirk rather than a fault, though it tells you something about how the seller positions it. Against the DEJUNPIOOL, you pay more and get no spare chains, but you don't need to own a battery platform first.

Pros:

• Two 2000mAh batteries included
• 2 year manufacturer warranty stated
• Safety gloves and goggles in the box
• Second-fastest seller of the seven
• Two interchangeable bars, 6 in and 8 in

Cons:

• 8-inch maximum bar caps cut diameter
• Weight claim of 3.2 lbs conflicts with the 3.3 lb specification
• No spare chains, unlike the DEJUNPIOOL
• Only one seller lists it

6. VOTLEMI Mini Chainsaw Cordless — Best for pros

The most compact saw here at 5.51 x 15.1 x 4.53 in, built for one-handed repetitive trimming rather than anything structural.

Best for: one-handed trimming and repetitive small cuts Skip it if: you cut anything wider than 6 inches

This is the smallest tool in the set by overall dimensions, and the only pick with a single fixed bar length rather than a swap kit. That sounds like a limitation until you use a small saw for an hour: fewer parts means less to loosen, and a 6-inch bar is all you need for limbs and offcuts.

VOTLEMI states a 1000W brushless motor, a 21V 2000mAh battery with up to 30 minutes of runtime, an automatic oiler, and a claimed 2.54 lb weight. That last figure appears only in a feature bullet, not the specification list, so treat it as the brand's claim rather than a confirmed number. The listing also describes a safety lock against accidental starts, and there's a stated 1 year warranty, the shortest of the three picks that publish one.

It's the second-cheapest pick here, and two sellers list it, so it's not a single-source item. Model number VT2602 is published, which helps if you ever need a matching chain.

The honest limits: a 6 in bar is the shortest reach in this set, a single 2000mAh battery gives you half what the Supstable ships, and no weight figure appears in the specifications at all. Against every other pick, it's the narrowest tool in scope.

Pros:

• Smallest overall footprint at 15.1 in long
• Second-cheapest pick in the set
• 1 year warranty stated
• Two sellers stock it
• Safety lock against accidental starts

Cons:

• 6 in bar only, no longer option
• Single battery, half what Supstable includes
• No weight in the published specifications
• Shortest warranty of the three picks that state one

7. RYNOXUS Mini Chainsaw for Milwaukee M18 Battery — Best budget pick

The cheapest pick here and the only one built around Milwaukee M18 packs, though at 4.78 lb it's the heaviest of the mini saws.

Best for: Milwaukee M18 owners adding a cheap cutting tool Skip it if: you don't already own M18 packs

If your shop runs Milwaukee, this is the only saw in the set that takes your batteries. That single fact decides it. Nothing else here fits an M18 pack, and buying a whole new platform for one small saw makes no sense.

RYNOXUS states an 800W brushless motor with 5000 RPM no-load speed and a 15m/s chain speed, plus 6-inch and 8-inch bar modes, a tool-free chain tensioner and continuous automatic oiling. Those are the lowest published motor and chain-speed figures among the minis here, which is consistent with it also being the cheapest.

The published weight is 4.78 lb and the body measures 3.1 x 15.7 x 5.5 in, making it the slimmest profile in the group at 3.1 in wide. Its own bullet claims 2.5 lbs, which does not match the 4.78 lb specification, and the specification is the number to trust. Note that the difference is likely the M18 pack, which you supply yourself.

It's the slowest seller of the seven by a wide margin, and it's a bare tool with no battery or charger. There's no stated warranty. Against the DEJUNPIOOL, which is also a bare tool at a similar tier, you get no spare chains and lower claimed power.

Pros:

• Cheapest pick in this set
• Only M18-compatible saw here
• Slimmest body at 3.1 in wide
• 6 in and 8 in modes with tool-free tensioning
• Published RPM and chain speed figures

Cons:

• No battery or charger included
• Weight bullet of 2.5 lbs conflicts with the 4.78 lb specification
• Lowest claimed motor output of the mini saws
• Slowest seller of the seven, and no stated warranty

What does each price tier actually buy?

Three tiers, and the jump between them buys something specific.

Entry tier. RYNOXUS, VOTLEMI and DEJUNPIOOL sit here. What you get is a 6 or 8-inch bar, a body under 5 lb, and a claimed brushless motor. What you often don't get is a battery: two of the three are bare tools. The exception is VOTLEMI, which includes a single pack.

Middle. Supstable alone. The step up buys two batteries instead of one, a safety kit with gloves and goggles, and a stated 2 year warranty. You are paying for completeness, not capability, because the bar still tops out at 8 inches.

Top of the range. SEESII, Oregon and EGO. Here the money buys bar length: 12, 18 and 16 inches respectively. That's the real dividing line in this field. Every saw under the top tier stops at 8 inches, and no amount of claimed wattage changes that.

The trap is assuming the entry tier is a worse version of the top tier. It isn't. It's a different tool for a different cut. A 2.7 lb one-handed saw and a 12.6 lb 18-inch saw don't compete, they take turns.

Bare tool or battery included?

Check this before anything else, because two of these seven picks arrive as a tool and nothing more.

Bare tools: RYNOXUS needs Milwaukee M18 packs. DEJUNPIOOL needs DEWALT 20V MAX packs and names DCB200 through DCB206 as compatible. Both listings state that no battery or charger is included.

Battery included: SEESII describes two 4.0Ah packs. Supstable describes two 2000mAh packs. VOTLEMI includes one 21V 2000mAh pack. EGO includes a 56V 2.5Ah battery and charger.

No battery needed: Oregon is corded, running from an outlet.

The maths is unforgiving on bare tools. A single-name-brand battery and charger can cost more than the entry-tier saw itself, which means the cheapest pick here is only cheap if you already own the packs. If you don't, Supstable or SEESII will land ready to work.

One more wrinkle worth knowing: EGO's 56V platform doesn't share cells with any 18V or 20V tool. It's a standalone system, so budget accordingly if you plan to add more EGO tools later.

Can a chainsaw really do woodworking cuts?

Only partly, and this is where you have to make your own call. Amazon's results for this search return general-purpose outdoor chainsaws, not tools built for joinery, and no listing in this set publishes a specification confirming fine-cut capability. One product name uses the word woodworkers, but that's a listing keyword rather than a verified feature.

What a chainsaw genuinely does in a woodworking context is rough work: breaking down logs, cutting slabs to rough length, sizing stock before it reaches a bandsaw or a planer. Nobody cuts a tenon with one.

So judge these saws on the tasks you can verify from the specifications:

• Bar length sets your maximum cutting diameter, and it's published for every pick.
• Weight decides how long you can hold a cut steady, and it ranges from 2.7 lb to 12.6 lb here.
• Chain sharpening decides how cleanly you cut over time. Oregon is the only pick with a built-in sharpening claim.

If your work needs a controlled, repeatable cut face, a chainsaw is the wrong tool regardless of which one you pick. If your work needs rough stock reduced fast, bar length is your answer.

What the listings leave out

Working from published data means noticing the gaps. Four are worth flagging across the best electric chainsaw for woodworkers picks here.

Weight contradictions. Four listings state one weight in the specifications and a different one in a feature bullet. SEESII says 9.92 lb and 12 lbs. Supstable says 3.3 lb and 3.2 lbs. RYNOXUS says 4.78 lb and 2.5 lbs. VOTLEMI publishes no specification weight at all, only a 2.54 lb bullet claim. Trust the specification figure, and assume bullet claims may exclude the battery.

Warranty silence. Only three of the seven publish one: Oregon at 2 year, Supstable at 2 Year Manufacturer Warranty, VOTLEMI at 1 year. The other four say nothing, which is not the same as having none, but it does mean you cannot compare on that basis.

Chain pitch and gauge. No listing here publishes chain pitch or gauge. That's the specification you'll need when you buy a replacement chain, and you'll have to get it from the model number: M12 Studio, 0062, CS1500, JY-CH0701, BL-168, CS1611, VT2602.

Noise. Only Oregon mentions noise at all, and only comparatively, saying it's quieter than a gas saw. No decibel figure appears on any pick.

The verdict

The SEESII 12-Inch Electric Chainsaw Cordless wins because it's the only pick that lands between the 8-inch minis and the 16-inch felling saws. A 12-inch bar at 9.92 lb, with two 4.0Ah packs described in the listing, covers dimensional lumber, posts and limbs without asking you to buy a second tool for either end of the range. It's also the fastest seller of the seven, which tells you something about how buyers in this category are actually choosing.

Two conditions flip it. First, if your regular cuts exceed 8 inches in diameter, go to the EGO POWER+ Chain Saw. Its exact advantage is bar length per pound: 16 inches at a published 9 lb, lighter than the SEESII with 4 more inches of reach, plus a stated 130 cuts on a 4x4 from the included 56V pack.

Second, if you're already invested in DEWALT 20V MAX, buy the DEJUNPIOOL Cordless Mini Chainsaw instead. At 2.7 lb with four chains and two bars in the box, it costs a fraction of the SEESII because you're supplying the expensive part.

And if your bench sits near an outlet with no battery discipline in your workflow, the Oregon CS1500 is the pick. It's the only one with a built-in sharpening system and a plain 2 year warranty, and the cord means the runtime question never comes up.

FAQ

Is a mini chainsaw worth buying for shop work?

A mini chainsaw is worth buying for shop work if your cuts stay under 8 inches in diameter and you value one-handed control. The DEJUNPIOOL weighs 2.7 lb and ships with four chains and two bar lengths. What you give up is reach: none of the mini saws here extends past an 8-inch bar, so log work needs a bigger tool.

What bar length do I need for cutting lumber?

The bar length you need for cutting lumber depends on your thickest stock, plus a margin, since the drive housing eats into usable reach. An 8-inch bar handles 4x4 posts. The SEESII's 12-inch bar covers most dimensional lumber comfortably. For logs and slabs, the EGO's 16-inch or the Oregon's 18-inch bar is the honest minimum.

Does the best electric chainsaw for woodworkers need to be cordless?

The best electric chainsaw for woodworkers doesn't need to be cordless if your bench sits near power. The corded Oregon CS1500 delivers unlimited runtime and needs no battery management, and it's the only pick with built-in sharpening. Cordless wins on mobility. If you cut in a yard, a driveway and a shop, the SEESII or EGO makes more sense.

SEESII or EGO POWER+: which should I pick?

Between SEESII and EGO POWER+, bar length decides it. SEESII gives a 12-inch bar at 9.92 lb and two 4.0Ah batteries. EGO gives a 16-inch bar at 9 lb with a 56V 2.5Ah pack and a stated 130 cuts on a 4x4. Under 8-inch stock, take the SEESII. Bigger logs, take the EGO.

What's the biggest mistake buying a battery chainsaw?

The biggest mistake buying a battery chainsaw is not checking whether the battery is included. RYNOXUS and DEJUNPIOOL are both bare tools requiring Milwaukee M18 or DEWALT 20V MAX packs you supply. A cheap saw plus a name-brand battery and charger often costs more than a bundled kit like the Supstable, which includes two packs.

Start by measuring the thickest thing you actually cut, then read the bar length column in the table above and eliminate everything below it. That one step disqualifies most of this field for most buyers and saves you from owning a 6-inch saw for 10-inch work. The SEESII earns the default spot because 12 inches is the length that stops you needing two saws, and because it arrives with power in the box rather than a compatibility list. If you already own DEWALT or Milwaukee packs, spend the saved money on chains instead.

Last updated: September 21, 2026. Product availability re-checked.

This page contains affiliate links. As an Amazon Associate we earn from qualifying purchases, at no extra cost to you.